5 Series E34 525tds (M51) SAL
Replacement fuel-injection pump
(diam. 0.68 mm)
Manufacturing period 1/94 up to
1/95
13 51 2 245 735
Only applicable if check in accordance with point 2c) requires it:
DDE control unit suitable for
525 tds saloon
Manufacturing period: start of series
production - 9/92
Manufacturing period: 9/92 - 1/95
13 61 2 246 317
13 61 2 246 320
DDE control unit suitable for
525 tds touring :
Manufacturing period: start of series
production - 9/92
Manufacturing period: 9/92 - 1/95
13 61 2 246 318
13 61 2 246 321
Reimbursement:
Materials and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms as follows.
Defect code
13 61 94 14 00
The defect code is not listed in the Defect Code
Catalogue, but it is stored in the reimbursement
system.
To fault pattern 1:Checking version of
flywheel(without replacing flywheel)
Job number
00 51 206
Labour
E34 5 FRUs
E36 6 FRUs
Checking version of flywheel and replacing
flywheel
Job number
00 51 207
Labour
E34 48 FRUs
E36 56 FRUs
To fault pattern 2:
Applicable to E34/525tds A only
There are eight different work packages
depending on the scope of the procedure / test
results described:
1. Checking version of flywheel and fuel-injection
pump, reading out version release of DDE,
replacing speed sensor, start-of-injection sensor,
engine wiring harness and EPROM in EGS.
Job number
00 51 206
Labour
5 FRUs
SI Fault "106 MUX" in EGS E34 E36 M51
BMW AG - TIS
23.01.2013 19:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -