5 Series E34 525tds (M51) SAL
11 12 595
Checking one valve guide for signs of wear -
valve removed (M51)
Note:
valve removed
To measure tilt clearance, insert new valve so that valve-shaft end
is flush with valve guide.
Fit dial gauge and measure tilt clearance.
For max. permissible tilt clearance, refer to Technical Data
Note:
If tilt clearance is excessive, valve guide should be reamed
and a repair valve with a larger shaft diameter should be
installed.
For shaft diameter, refer to Technical Data
If necessary, ream out valve guide, refer to 11 12 600
RA Checking one valve guide for signs of wear - valve removed (M51)
BMW AG - TIS
23.01.2013 19:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -