5 Series E34 525tds (M51) SAL
11 23 010
Removing and installing or replacing
vibration damper (M51)
Remove front underbody protection from assemblies.
Remove fan with fan coupling, refer to 11 52 020
Remove drive belt for alternator, refer to 11 28 010
Removing belt pulley on water pump.
Removing reversing roller on clamping lever.
Unscrew vibration damper bolts and take off vibration damper.
Installation note:
Align locating bore in vibration damper with dowel.
RA Removing and installing or replacing vibration damper (M51)
BMW AG - TIS
23.01.2013 19:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -