5 Series E34 525tds (M51) SAL
Lift out the brake band.
Remove the complete unit for clutch "A", "B" with 2nd gear
freewheel and clutch "E" from input shaft.
Note:
Pay attention to the thrust bearing beneath the unit on the
intermediate shaft.
Lift freewheel off clutch "B".
Note:
The clutch and freewheel are sticking to each other only due
to the oil film.
Make sure that the freewheel does not fall apart.
RA Replacing input clutch "B"
BMW AG - TIS
23.01.2013 20:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -