bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Antenna Elbow Plug On Radio Receiver|Page 1147 > < 2 RA Notes On Replacing Drier Bottle Or Drier Insert
Page 1
background image

61 13 ...

Antenna elbow plug on radio receiver

Important!

This repair solution is only possible

up to model year 10/ 2000.

Replace entire antenna cable on affected vehicles.

Refer to Spare Parts Catalogue.

Cut off faulty antenna angle plug directly after strain relief.

Carefully and with precision, strip insulation from antenna cable as
illustrated (lengths given in mm). 

Brush shield (copper braid) towards rear. 

Important!

There must be no more copper wire protruding in the direction
of the inner conductor on the inner conductor insulation (risk
of short circuits).

Create a loop on inner conductor.

Important!

Cover soldering area extensively in center console all round
radio aperture.

Avoid blobs of melted solder in inside area.

RA  Antenna elbow plug on radio receiver

BMW AG - TIS

24.01.2013  12:16

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Antenna Elbow Plug On Radio Receiver|Page 1147 > < 2 RA Notes On Replacing Drier Bottle Or Drier Insert