5 Series E34 530i (M30) SAL
Recycling:
Catch and dispose of escaping transmission fluid.
Observe country-specific waste-disposal regulations.
Release screws and pull out guide tube.
Note:
Two covered removal holes (1) are located on end face of
radial seal.
Screw special tool 23 0 490 into one of the two removal holes.
Withdraw radial seal from transmission housing with aid of impact
weight.
RA Removing and installing complete drive and output shafts (S5D 260Z / 310Z / 320Z
BMW AG - TIS
25.01.2013 00:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -