5 Series E34 530i (M30) SAL
Installation:
Install bearing shell (1) in such a way that slot in bearing shell
is flush with knob (2) (turning lock) in housing.
Drive in bearing shell (1) with special tool 23 1 260 and special
tool 00 5 500 .
RA Replacing bearings on all transmission shafts (S5D 260Z / 310Z / 320Z)
BMW AG - TIS
25.01.2013 00:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -