5 Series E34 530i (M30) SAL
Installation:
Do not reuse bent retaining tabs for securing purposes.
Using special tool 24 1 300, first bend two opposing
retaining tabs, then 4 more retaining tabs at regularly spaced
intervals.
Remove sun shaft (1).
Installation:
Tension disc carrier C upwards with special tool 24 1 290.
Remove axial needle bearing (1).
Installation:
Note installation position of axial needle bearing (1).
Coat rectangular ring (2) with Vaseline.
RA Dismantling and assembling automatic transmission (A5S560Z)
BMW AG - TIS
25.01.2013 00:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -