5 Series E34 530i (M30) SAL
Remove complete differential case.
Caution!
Do not bend the pulse generator wheel.
Press pulse generator wheel off of differential case.
Caution!
Do not bend pulse generator wheel (3).
Installation:
Press fit pulse generator wheel using special tool 33 1 358.
Pull taper roller bearing off differential housing with special tool
33 1 300.
RA Replacing both bearings on final drive housing (Type M) - final drive removed -
BMW AG - TIS
25.01.2013 00:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -