5 Series E34 530i (M30) SAL
32 00 Wheel Alignment - Normal Position / Inspection Conditions E32 / E34 / 518g / 518i / 520i / 524td / 525i / 525ix /
525td / 525tds / 530i / 535i / 540i / 730i / 730iL / 735i / 735iL / 740i / 740iL / 750i / 750iL
Car loaded down to normal position
Vehicle with complete equipment for
normal operation with:
2 x 68 kg on front seats (seats in central
position)
1 x 68 kg on rear seat (center)
1 x 21 kg in luggage compartment
(center)
and full fuel tank.
Requirements:
1. Specified rims and tires with uniform
tread pattern (refer to MG 36)
2. Correct tire pressure (refer to
instruction plate on vehicle)
3. Specified wheel bearing clearance
(refer to MG 31/33)
4. Ride level control in normal
positionRide level measurement, see
Rep. Manual 31 33 095Important! If
there is any deviation from nominal
value, repair the vehicle (refer to
troubleshooting Repair Instructions)
5. Set correct ride height for alignment =
spec. value
±
2mm by loading or
unloading car.
TD Wheel Alignment - Normal Position / Inspection Conditions E32, E34 / 518i, 520i,
BMW AG - TIS
25.01.2013 03:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -