5 Series E34 530i (M60-1) TOUR
11 14 080
Removing and installing / sealing or replacing
top left timing case cover (M60)
(Cylinder bank 5-8)
Remove left cylinder head cover. This operation is
described in section on removing and installing/sealing
both cylinder head covers,
refer to 11 12 004
Remove fan coupling with fan wheel,
refer to 11 52 020
If necessary, remove tubes for secondary air intake,
refer to 11 72 200
Note:
Do not damage main flow oil filter cover. Only open and
tighten with socket wrench. Unfasten main flow oil filter cover -
engine oil now flows back into oil pan.
Installation:
Oil filter insert must locate in oil filter cover. Replace sealing
ring and coat with oil.
Tightening torque,
refer to Technical Data 11 42 2AZ
Unfasten oil drain line on main flow oil filter.
Installation:
Replace sealing ring.
Tightening torque,
refer to Technical Data 11 42 5AZ
RA Removing and installing / sealing or replacing top left timing case cover (M60)
BMW AG - TIS
26.01.2013 04:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
