5 Series E34 530i (M60-1) TOUR
Check installation position with special tool 11 2 430.
Note:
Cylinder lettering 1-4 on special tool 11 2 430 points
upwards.
Caution!
Do not confuse camshaft bearing covers of cylinders 1-4 and
5-8.
Note:
The exhaust camshaft bearing covers are legibly marked
A 1 - A 5 from the intake side.
Note:
The intake camshaft bearing covers are legibly marked with
E 1 - E 5 from the intake side.
Fit bearing covers.
Evenly tighten down bearing covers on camshafts for cylinder
bank 1-4 in 1/2 turn steps from outside to inside.
Tightening torque,
refer to Technical Data 11 31 1AZ
RA Replacing right camshaft (M60)
BMW AG - TIS
26.01.2013 05:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -