5 Series E34 530i (M60-1) TOUR
11 34 715
Replacing all valve springs
(cylinder head removed)
Preliminary work is described in section on dismantling and
assembling the cylinder head,
refer to 11 12 503
Removing camshaft,
refer to 11 31 501
Remove bucket tappet with special tool 11 3 250.
Installation:
Worn bucket tappets may only be reused in the same tappet
bore.
Arrange bucket tappets by cylinder and place on special
tool 11 3 030 in correct order.
RA Replacing all valve springs
BMW AG - TIS
26.01.2013 05:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -