5 Series E34 530i (M60-1) TOUR
Installation:
Adjust chain deflection (A = 10
±
2 mm) by turning
adjustment hex screw in the oil pump. Install screw and
tighten down.
Note:
Use screwdriver insert (bit), Allen key (long version) or similar
tools with long hex head. In the procedure illustrated in this
diagram, the short leg of a standard Allen key is shortened to
approx. 32 mm.
If necessary, remove oil pressure control piston.
Press sleeve downwards with suitable drift.
Caution!
High spring pressure.
Remove circlip.
Installation:
(1)
Control piston
(2)
Spring
(3)
Sleeve
(4)
Circlip
RA Removing and installing/replacing oil pump (M60)
BMW AG - TIS
26.01.2013 05:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -