5 Series E34 530i (M60-1) TOUR
24 12 106
Replacing radial seal for manual shift valve
shaft (A5S 310Z)
Loosen nut (1).
Caution!
Always counterhold bolt with special tool 24 5 220 to avoid
deformation of the cable.
Note:
Special tool 24 5 220 can only be fitted in position "P".
Unscrew cable from holder.
Pull out cable.
Installation:
Adjust selector lever, refer to 24 00 007
Unscrew lever (2).
Installation:
Tightening torque, refer to Technical Data 24 51 1AZ
Remove radial seal with special tool 24 5 260.
RA Replacing radial seal for manual shift valve shaft (A5S 310Z)
BMW AG - TIS
26.01.2013 06:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
