5 Series E34 530i (M60-1) TOUR
64 52 001
Replacing the drive belt for the compressor of
the air conditioning system
Remove the underbody protection,
Slacken nuts (4 and 5) on tensioner and remove ribbed drive belt
from compressor.
Installation:
Turn tensioning roller on hex screw (3) until tight, then tighten
nut (5) followed by nut (4).
Tightening torque = 24 Nm
RA Replacing the drive belt for the compressor of the air conditioning system
BMW AG - TIS
26.01.2013 07:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
