5 Series E34 540i (M60-2) TOUR
Clean thread for flywheel screws in crankshaft.
The flywheel (ZMS) is located with a special (shorter) dowel
sleeve.
Caution!
Replace only with original BMW spare parts.
Installation:
The position of the dowel sleeve (1) in the dual-mass flywheel
is marked with two notches beside the respective screw bore.
Caution!
Flywheel screws are part of the flywheel and must not be
installed with screw securing adhesive (Loctite).
Lubricate screw threads lightly.
Tightening Torque,
refer to Technical Data 11 22 1AZ.
RA Removing and installing/replacing flywheel (M60)
BMW AG - TIS
28.01.2013 02:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
