5 Series E39 520d (M47) SAL
Removal:
Removal of cylinder head is described separately from installation.
Assembly sequence for removal and installation is different.
Remove camshafts,
refer to 11 31 001.
Caution!
These screws must "not" be removed.
Remove suspension element from cylinder head.
Remove bearing pin (1) for sliding rail.
Note:
The sliding rail is guided and secured at a bearing pin and is
only removed later because of better accessibility.
RA Removing and installing cylinder head (M47)
BMW AG - TIS
22.01.2013 22:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -