5 Series E39 520d (M47) SAL
11 12 595
Checking a valve guide for wear (M47 /
M47TU)
Special tools required:
•
00 2 510
(valve removed)
For tilt clearance to be measured, a new valve is installed in such
a way that end of valve stem is flush with valve guide.
Fit special tool 00 2 510 (dial gauge) and measure tilt
clearance.
Max. permissible tilt clearance.
Note:
If the tilt clearance is too large, the cylinder head and the
valves must be replaced.
RA Checking a valve guide for wear (M47 / M47TU)
BMW AG - TIS
22.01.2013 22:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
