5 Series E39 520d (M47) SAL
Installation:
Clean sealing surface to remove all gasket remnants.
Apply approx. 3 mm wide, 2 mm high coat of Drei Bond 1209
sealing agent (refer to BMW Parts Service) to the area around
seams.
Replace seal.
Installation:
-
Install all oil sump screws.
-
Initially tighten oil sump screws on transmission side still
without preload.
-
Tighten down oil sump screws on engine side.
-
Tighten down oil sump screws on transmission side.
RA Removing and installing, sealing or replacing oil sump (M47)
BMW AG - TIS
22.01.2013 22:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -