5 Series E39 520d (M47) SAL
11 28 020
Replacing alternator drive belt tensioner
(M47)
Remove alternator drive belt,
refer to 11 28 010.
Caution!
Belt tensioner is under spring pressure.
Carefully and slowly pretension belt tensioner with a 1/2" socket
wrench extension and remove special tool 11 3 340.
Release plug (1) and seal plug (2 and 3), remove belt
tensioner.
Installation:
Replace O-ring on plug (1).
Tightening Torque of plug (1),
refer to Technical Data 11 28 2AZ.
Note:
The hydraulic belt tensioner is filled with oil, so that a removed
element must always be stored standing upright.
Incorrectly stored elements can usually be vented by pressing
into installed position several times.
RA Replacing alternator drive belt tensioner (M47)
BMW AG - TIS
22.01.2013 22:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -