5 Series E39 520d (M47) SAL
Set up special tool 11 6 322 from special tool kit 11 6 320
with commercially available screws.
Lock inlet camshaft with special tool 11 6 320 .
Note:
When releasing camshaft screw connection, grip camshafts at
hexagon drive.
-
Slacken screw (1).
-
Slacken screw (2).
-
Remove screw (1).
Remove special tool 11 6 320 .
Note:
Remove exhaust chain wheel through opening for vacuum
pump. Do not damage sealing surface.
Feed out timing chain, remove exhaust chain wheel.
Remove previously slackened screw (2). Feed out timing chain,
remove inlet chain wheel.
RA Replacing camshafts (M47)
BMW AG - TIS
22.01.2013 22:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -