5 Series E39 520d (M47) SAL
Caution!
These screws must "not" be removed.
Installation:
Installation of camshafts is described separately from removal.
The assembly sequence differs between removal and installation.
Note:
Lubricate camshafts, bearings and bearing caps prior to
installation.
Note:
Worn rockers may only be reused on the same grooves of the
camshaft.
Install rockers.
Note:
E
Inlet camshaft
A
Exhaust camshaft
RA Replacing camshafts (M47)
BMW AG - TIS
22.01.2013 22:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -