5 Series E39 520d (M47) SAL
•
Disconnect plug from oil pressure switch.
•
Release support bracket between timing case cover and
main flow oil filter.
•
Remove guide tube for oil dipstick from main flow oil filter.
•
Remove main flow oil filter housing from engine block (four
screws).
Installation:
Clean sealing surface on engine block.
Installation:
Clean sealing surfaces.
Replace seals (1 and 2).
Assemble engine.
RA Removing and installing/sealing or replacing complete main flow oil filter (M47)
BMW AG - TIS
22.01.2013 23:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -