5 Series E39 520d (M47) SAL
11 61 050
Removing and installing intake air manifold
(M47)
Special tools required:
•
00 2 190
Note:
Switch off ignition.
Follow instructions for disconnecting and connecting battery.
Disconnect and cover battery negative lead.
Caution!
It is absolutely essential to seal the inlet ducts on the cylinder
head immediately after removing the manifold.
Caution!
If the charge air hoses are not fitted without grease and dry,
this will result in supercharger failure.
Fit charge air hoses without grease and dry.
Release screws.
Withdraw snorkel (1) from corrugated tube (2) and remove.
RA Removing and installing intake air manifold (M47)
BMW AG - TIS
22.01.2013 23:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
