5 Series E39 520d (M47) SAL
Removal:
Subsequent removal of injection pump is described separately
from installation.
The assembly sequence for removal and installation is different
from this point.
Release central nut (21 A/F) on injection pump shaft.
In doing so, grip crankshaft at front central bolt.
Retighten central nut to approx. 30 Nm.
Remove plug (1) of alignment bore from crankcase.
RA Removing and installing/replacing injection pump (M47)
BMW AG - TIS
23.01.2013 00:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
