5 Series E39 520d (M47) SAL
Lever out retainer (1).
Withdraw selector rod (2) from joint and remove washers (3).
Installation:
Pay attention to installation position of washers (3).
Grease selector rod.
Grease,
refer to BMW Service Operating Fluids.
Insert special tool 11 7 310 between engine oil sump and front
axle support.
Lower transmission.
Support engine at front with a workshop hoist.
Remove retaining clip with a screwdriver.
RA Removing and installing transmission (S5D 320Z)
BMW AG - TIS
23.01.2013 00:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -