5 Series E39 520d (M47) SAL
Mark out connection point in cover for side member in front of side
panel:
Dimension (A) = 40 mm from center of bore
∅
12 mm.
Mark cutting line, B-pillar.
Reference edge = edge of hinge over locating bore or locating
taper for doors
E = 380 mm
F = 470 mm
Reference edge = lower edge of roof
C = 150 mm
D = 240 mm
Caution!
Protect ITS head airbag so that it cannot be damaged during
welding or grinding work.
Due to
-
welding chips
-
grinding chips
-
excess heating over 70
°
C
the functional capability of the ITS head airbag can be impaired. In
extreme cases, it will not be able to function at all!
RA Replacing left or right side member cover (partial replacement of A-column and r
BMW AG - TIS
23.01.2013 03:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -