5 Series E39 520d (M47) SAL
51 22 330
Removing and installing/replacing window
cavity cover strip on inside rear door
Remove rear left or right door trim,
refer to 51 42 000.
Beginning from front, raise clips with special tool 00 9 321 (folding
leg).
Pull window cavity trim (beginning at front) up out of clips.
Note:
The rear clip (1) cannot be removed due to windshield
adhesive.
If necessary, remove clips (1) and attach to inner door panel.
Installation:
If necessary, remove faulty clips (1) from inner door panel (2)
and replace.
RA Removing and installing/replacing window cavity cover strip on inside rear door
BMW AG - TIS
23.01.2013 04:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -