5 Series E39 520d (M47) TOUR
9.
Connect wire (violet/red) from the relay carrier to the wire (red/violet) from the ballast
wiring harness. At the relay carrier, separate one of the two wires (2) (violet/red) at a
distance of about 8 cm from the relay carrier. Join the ends of the wire with the wire
(red/violet) from the ballast wiring harness using a butt connector and shrinkable PVC
hose. Attach the double stop to the side of the relay carrier.
1.
Wire (red/yellow)
2.
Wires (violet/red)
10. Loosen the nut on the ground connector (3). Connect the ground strap (brown) to the
vacant slot. Please refer to Repair Instructions
"Installing fan connector for retrofitting/repairs". Repair Instructions 6113.
1.
Ballast
2.
Ballast wiring harness
3.
Ground connector
11. Reinstall removed parts and check that the auxiliary heater is working correctly.
Parts:
Description
Part number
Quantity
Auxiliary heater
repair kit
64 12 6 915 816
1
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms.
Defect code
64 12 93 83 00
SI The auxiliary heater will not switch off or switches on unexpectedly E39 M47 M57
BMW AG - TIS
23.01.2013 21:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -