5 Series E39 520d (M47) TOUR
Remove oil filter element (1) towards top.
Installation:
Press oil filter element (1) onto fixture in oil filter housing.
Open cover in engine underguard.
Open oil drain plug or drain off oil.
Installation:
Replace sealing ring.
Tightening Torque,
refer to Technical Data 11 13 1AZ.
Top up engine oil.
Complete vehicle and set in horizontal position.
Start engine and run at idle speed until oil indicator lamp goes out.
Switch off engine, wait approx. 5 minutes and then check engine
oil level.
Top up engine oil if necessary.
RA BMW engine oil service (M47)
BMW AG - TIS
23.01.2013 22:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
