5 Series E39 520d (M47) TOUR
Drain and dispose of coolant,
refer to General Information for working on cooling system.
Installation:
Replace seal.
Tightening Torque,
refer to Technical Data 11 11 5AZ.
Fill cooling system, vent and check for leaks,
refer to 17 00 005.
Remove EGR cooler,
refer to 11 71 100.
Note:
Thermostat for EGR cooler does not have to be removed.
Pull lock (1) and detach water hoses.
Installation:
Refer to general instructions for work on cooling system.
Release screw on coolant connecting line.
Note:
Screw with M7 thread.
Installation:
Replace sealing ring.
Install screw and tighten down.
Tightening Torque,
refer to Technical Data 11 51 1AZ.
RA Removing and installing cylinder head (M47)
BMW AG - TIS
23.01.2013 22:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
