5 Series E39 520d (M47) TOUR
Check that dowel sleeves are undamaged and correctly located.
Note:
The joints between timing case cover and engine block are
sealed with sealing strips that are attached as standard.
It is not necessary to apply a permanently elastic sealing
compound.
Caution!
The tapped bores in the engine block must be dirt and oil-free.
(Risk of cracks, incorrect tightening values).
Lay on new cylinder-head seal with previously determined seal
thickness (number of holes).
RA Removing and installing cylinder head (M47)
BMW AG - TIS
23.01.2013 22:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -
