5 Series E39 520d (M47) TOUR
Lay special tool 11 3 136 (rubber mat) to protect valves against
damage on special tool 11 3 132 .
Caution!
Do not damage sealing surface of cylinder head.
Cover special tool 11 1 065 (assembly frame) in area (1) of
cylinder head seat with insulating tape or similar material.
Position cylinder head on special tool 11 1 065 and secure with
commercially available M10 screws (1).
Remove all valve stem seals 11 34 560
.
Remove valves downwards and put down in an orderly fashion.
RA Disassembling and assembling cylinder head (M47 / M47TU)
BMW AG - TIS
23.01.2013 22:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -