5 Series E39 520d (M47) TOUR
11 14 141
Replacing radial seal in lower timing case
cover (M47)
Remove vibration damper,
refer to 11 23 010.
Fit special tool 11 2 383 to crankshaft.
Removing radial sealing ring:
Screw in special tool 11 6 360 until it has made firm contact with
radial seal.
Then remove radial seal by turning screw.
Installation:
Fit special tool 11 6 340 to crankshaft.
Lubricate sealing lip of new radial seal and slide over special
tool 11 6 340 until radial seal contacts timing case cover.
Remove special tool 11 6 340.
RA Replacing radial seal in lower timing case cover (M47)
BMW AG - TIS
23.01.2013 22:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -