5 Series E39 520d (M47) TOUR
Caution!
Piston and piston bolts are paired and must not be fitted
individually.
Fit the retaining ring with its aperture opposite to recess.
Caution!
Re-install piston, connecting rod and bearing shells back in
the same position and in the same installation location.
Connecting rods and bearing covers are designated with the
same pair number: do not mix them.
Insert special tool 11 6 330 in conrod.
Lightly coat pistons and piston rings with oil.
Align contact points on piston rings (offset at approx. 120
°
, but do
not arrange over piston pin lug).
Press together piston rings with special tool 11 2 260.
RA Removing and installing or replacing all pistons (M47)
BMW AG - TIS
23.01.2013 22:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
