5 Series E39 520d (M47) TOUR
Assemble special tool 00 0 200 with special tool 00 0 201 /
00 0 202 / 00 0 204 / 00 0 208 and install.
Secure special tool 00 0 200 to front engine suspension eye.
Note:
The supports (1) of special tool 00 0 208 must rest on the
bolt connection of both side walls.
Tighten down screws (1 and 2).
Raise engine approx. 5 mm with special tool 00 0 200 .
Release nut on left engine mount, slacken at bottom.
RA Removing and installing/sealing or replacing complete main flow oil filter (M47)
BMW AG - TIS
23.01.2013 23:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -