5 Series E39 520d (M47) TOUR
Disconnect plug connection (1) on oil pressure switch (2).
Disconnect positive lead (1) and both control lines (2 and 3) on
starter.
Installation:
Tightening torque,
refer to Technical Data 12 41 4AZ.
Disconnect plug connection on alternator.
Disconnect plug connection (1) on oil level switch (2) and
release cable fastening.
Detach cable from transmission.
For E46 only:
Release screws (1) and remove cover from electronics box.
RA Replacing wiring harness section for engine (M47)
BMW AG - TIS
23.01.2013 23:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -