bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Activated Carbon Filter With LDP (leak Diagnos > < 2 RA Removing And Installing_replacing The Sensor For The Fuel Level Gauge (left)|Page 874
Page 1
background image

 16 12 010

Removing and installing / replacing activated-
carbon filter

Remove rear left wheel,

refer to 36 10 300

Remove rear left wheel trim.

Loosen activated-carbon filter.

Note:

Release the connections for the intake pipe and tank
ventilation before pulling off with special tool 16 1 050.

Disconnect connections (1 ... 3)

Layout of connections:

1. 

Ventilation

2. 

Suction tube to engine

3. 

Tank venting

RA  Removing and installing / replacing activated-carbon filter

BMW AG - TIS

24.01.2013  00:09

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Activated Carbon Filter With LDP (leak Diagnos > < 2 RA Removing And Installing_replacing The Sensor For The Fuel Level Gauge (left)|Page 874