5 Series E39 520d (M47) TOUR
Separate separating points C and D of the B-column outward.
Caution!
Only separate the outer sheet metal of the B-column.
Drill off spot welding.
Remove the sheet metal cutout.
Mark the separating point in the cut-out area in the center and
completely separate the B-column.
Separate the separating points cover for the side member.
Drill out the points for the door opening.
Expose and open the connection point of the underbody.
Expose and open the connection points in the interior.
Remove side member cover.
RA Replacing left or right side member cover (partial replacement of A-column and r
BMW AG - TIS
25.01.2013 19:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
