5 Series E39 520d (M47) TOUR
Coat mating surfaces on body with zinc dust paint.
Clean mating surfaces on spare part and coat with zinc dust paint.
Coat reinforcements with zinc dust paint.
Fit, locate and weld reinforcement plates in side members.
Install and fasten the trunk floor.
Weld reinforcement plates to connecting points for side members,
left and right.
Note:
Connecting point for reinforcement plate for side member,
right.
Weld connecting points for side members, left and right.
Note:
Connecting point for right side member shown here.
RA Replacing rear luggage compartment floor completely (rear left side wall and tai
BMW AG - TIS
25.01.2013 19:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
