bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Replacing Rear Left Or Right Wheel Arch Outer Section (side Wall Removed) (touri|Page 1730 > < 6 RA Replacing Rear Left Or Right Wheel Arch Outer Section (side Wall Removed) (touri|Page 1728
Page 3
background image

Remove reinforcement for outer section of wheel arch.

Position of foam parts,

refer to 41 00 ... Arrangement of shaped parts for cavity sealing

refer to 41 00 ...

Caution!

In area of foam,

there is a further foam part in the C-pillar behind the
reinforcement for the wheel arch outer section,

Heat reinforcement for wheel arch outer section and detach
from foam.

Extract vapors and provide good ventilation.

Grind weld seams for reinforcement of side section / bracket, roller
blind.

Open connection point of

reinforcement for side section / outer wheel arch (1),

reinforcement for side section / door window (2),

reinforcement for side section / support carrier, rear wheel arch (3)

and reinforcement for side section / D-pillar (4).

Remove reinforcement for side section.

Connection point, support carrier, wheel arch, rear / wheel arch
outer section, open spots and release weld seams.

RA  Replacing rear left or right wheel arch outer section (side wall removed) (touri

BMW AG - TIS

25.01.2013  19:36

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

6 RA Replacing Rear Left Or Right Wheel Arch Outer Section (side Wall Removed) (touri|Page 1730 > < 6 RA Replacing Rear Left Or Right Wheel Arch Outer Section (side Wall Removed) (touri|Page 1728