5 Series E39 520d (M47) TOUR
Remove scrap metal.
Straighten and grind joint surfaces.
Remove foam (1) in C-pillar.
Caution!
If vapors are produced when the foam is removed, these must
be extracted. Ensure the area is well ventilated.
Adapt spare wheel arch outer section.
Clean connection point on spare wheel arch - outer section and
coat with zinc dust paint.
RA Replacing rear left or right wheel arch outer section (side wall removed) (touri
BMW AG - TIS
25.01.2013 19:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
