5 Series E39 520d (M47) TOUR
Open trunk lid.
Retighten screws in lower section of lock; if necessary, retighten
screws in upper section.
Adjust gap dimensions, height and position of rear window frame
relative to other fittings on rear window frame,
refer to 41 00.
To adjust height of rear window frame at lock, release lock nut (1)
and turn locking pin (2).
Tighten down lock nut (1) again.
Adjusting procedures:
Note:
Version with locking pin,
height and inclination of
locking pin can be adjusted.
RA Adjusting trunk lid to fit (touring)
BMW AG - TIS
25.01.2013 23:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
