5 Series E39 520d (M47) TOUR
Note:
Place a cleaning cloth underneath.
Detach lines from hydraulic unit,
refer to 51 24 150.
Routing of hydraulic hoses (1) and (2):
Routing of hydraulic hoses (1) and (2):
Snap hydraulic hoses (1) and (2) into clip (3).
Remove hydraulic cylinder with hoses (4).
Lift out hydraulic cylinder (4) and withdraw with hydraulic hoses.
Lever out rubber grommet (3).
The hoses on the hydraulic cylinder must be sealed tight. To do
so, use the plugs and cap nuts from the set "Banjo bolts for
hydraulic cylinder".
Installation:
Check function.
RA Removing and installing/replacing hydraulic cylinder for rear lid (electrohydrau
BMW AG - TIS
26.01.2013 00:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
