5 Series E39 520d (M47) TOUR
Fit knife (36 mm blade length, sourcing reference: BMW Parts
Service) to the tool.
Note:
Sharpen knife blade before every use on a running machine
with a grinding stone (even with new knife blade).
Cut through cement bead down sides and bottom edge (B).
Remove support and/or special tool 00 9 312.
Unfasten (1 and 2) Velcro fasteners:
Attach special tool 51 3 010 to rear window (as far outside as
possible) (dampen the suction surfaces).
Unfasten left burr fastener (1):
Carefully insert special tool 00 9 318 between rear window and
rear window frame but do not press into centre of rear window
(this would break the window).
Press special tool 00 9 318 downwards (against rear window
frame) and pull rear window upwards with special tool 51 3 010.
Unfasten right burr fastener (2) in the same way and remove rear
window with special tool 51 3 010.
Apply cement bead to rear window frame (thickness of approx. 0.5
mm).
To avoid damage to paintwork on rear window frame, carefully cut
away residue with scalpel.
Pull off adhesive tapes all round.
RA Removing and installing rear window (touring)
BMW AG - TIS
26.01.2013 00:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
