5 Series E39 520d (M47) TOUR
Pull out luggage compartment loading floor (1) (approx. 20 mm)
until screws (2) on outside left/right are accessible.
Press left/right roller blocks (on sides) (1) together by hand and
center. The luggage compartment loading floor (2) must show a
lateral clearance (A) here (quality impression).
Lateral clearance (A) = 0.2 mm to 1 mm.
Tighten left/right screws (3) (8.5 Nm).
Adjust longitudinal clearance (B):
Slide in luggage compartment loading floor (1) completely
(locked).
Slide both side rails (1) fully towards rear against luggage
compartment loading floor (2).
Longitudinal clearance (B) should be as little as possible.
RA Adjusting luggage compartment loading floor (pull-out) (touring)
BMW AG - TIS
26.01.2013 01:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -