5 Series E39 520i (M52) SAL
11 31 505
Adjusting camshaft timing (M52/S52)
(refer to Operation No. 11 31 005)
Before performing the adjustment work, check timing of
camshaft,
refer to 11 31 005
Unscrew oil pressure pipe.
Disconnect solenoid-valve plug-in connection.
Fit special tool 11 3 450 with banjo bolt on oil pressure line.
Connect up compressed air (2 ... 8 bar).
Note:
This ensures that spline shaft on VANOS adjustment unit
remains in basic setting and camshaft position is not altered
by VANOS adjustment unit.
Unfasten screw plugs.
RA Adjusting camshaft timing (M52/S52)
BMW AG - TIS
30.01.2013 06:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -