5 Series E39 520i (M52) SAL
Note position of vacuum connection. Rotate pressure regulator
and remove.
Installation:
Replace sealing rings (1 and 2). Ensure sealing that faces are
clean.
Installation:
Allow lug on circlip to engage in recesses of injector tube.
Carry out function check on Digital Motor Electronics,
refer to 13 00 002.
Interrogate fault memory of DME control unit, check faults in
memory then cancel fault memory.
RA Replacing fuel pressure regulator (M52,S52)
BMW AG - TIS
30.01.2013 07:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -