5 Series E39 520i (M52) SAL
13 63 555
Replacing throttle valve potentiometer (M52)
Switch off ignition.
Unfasten plug connection (1).
Unfasten screws (2).
Installation:
Check that O-ring (1) is in correct installation position.
It is not necessary to adjust throttle potentiometer (self-
adjusting).
Interrogate fault memory of DME-control unit, check faults in
memory then cancel fault memory.
RA Replacing throttle valve potentiometer (M52)
BMW AG - TIS
30.01.2013 07:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -